Placing Sander; Mounting - Grizzly G0459 Owner's Manual

Placing Sander

The Model G0459 is a
heavy machine (139 lbs.).
DO NOT over-exert your-
self while unpacking or
moving your machine—
get assistance.
To place the sander in a permanent location:
1.
With an assistant's help, lift the sander out of
the box and move it to your predetermined
location.
-12-

Mounting

Components and Hardware Needed:
Lag Bolts ⁄ -18 x 40 (Not Included) ..................4
5
16
Flat Washers ⁄ (Not Included) ........................4
5
16
To mount the drum sander to a bench top:
1.
Place the sander on a bench top capable
of holding approximately 140 lbs. plus the
weight of the workpiece. Make sure the sur-
face is flat and stable.
2.
Drill four ⁄ " holes on the bench, using the
1
4
holes in the base as a guide.
3.
Using a ⁄ " wrench, bolt the base to the
1
2
bench top with ⁄ " lag bolts and flat washers
5
16
as shown in Figure 5.
Figure 5. Installing sander onto bench top.
Qty
G0459 12" Drum Sander