Network Filters - D-Link Wireless N900 User Manual

Section 3 - Configuration
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers, by their MAC addresses, from
accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the router.
Configure MAC Select T urn MAC Filtering Off, Allow MAC addresses
Filtering: listed below, or Deny MAC addresses listed below
from the drop-down menu.
MAC Address: Enter the MAC address you would like to filter.
To find the MAC address on a computer, please refer
to the Networking Basics section in this manual.
DHCP Client: Select a DHCP client from the drop-down menu and
click << to copy that MAC Address.
Clear: Click to remove the MAC address.
D-Link DIR-855L User Manual

Network Filters

76