Access Files From The Internet - D-Link Wireless N900 User Manual

Section 3 - Configuration

Access Files from the Internet

If you would like Internet access to your files that are on your USB thumb drive or external hard drive that is connected to your router, follow the
steps below:
Step 1 - Enable SharePort Web Access
Check the Enable SharePort Web Access checkbox to enable. Enter
the port(s) you want to use for HTTP and HTTPS. The default for HTTP
is 8181 and HTTPS is 4433.
Step 2 - Create a User Account
Under User Creation, enter a username and password, and then click
Add/Edit.
Step 3 - Configure your Access Path
Under User List, click the Modify icon for the user you just created.
Here you can browse to the folder on your USB storage device you
want to assign the Access Path to.
Step 4 - Save Settings
If you want to add more users, repeat steps 3 and 4. Once you are
finished, click the Save Settings button at the top to save your
settings.
Note: The URL(s) you can use to connect to the USB drive will be
displayed under the SharePort Web Access Link (at the bottom). Also,
if you selected HTTPS, you must type in HTTPS:// instead of HTTP:// to
get a secure connection.
For example, if you selected HTTPS and changed the port to 3200,
and your WAN IP address of the router is 1.2.3.4, then you would enter
HTTPS://1.2.3.4:3200 to connect.
D-Link DIR-855L User Manual 54