Page 3
Make sure that the power plug is not squashed or • Do not clean the appliance with metal objects. damaged by the back of the appliance. A squash- • Do not use sharp objects to remove frost from the ap- ed or damaged power plug may overheat and pliance.
Operation Switching on A medium setting is generally the most suitable. Insert the plug into the wall socket. The Pilot light will light up. Turn the Temperature regulator clockwise. Important! If the temperature inside the appliance is too high the Alarm light will light up. Switching off To turn off the appliance, turn the Temperature regulator to the OFF position.
Daily use Freezing fresh food duces ice-build-up in the chest freezer by up to 80 per- cent. That means for you up to 5 years without defrosting. The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time. Storage baskets To freeze fresh food activate the Fast freezing function at Place the baskets inside the freezer.
• do not allow fresh, unfrozen food to touch food which • make sure that the commercially frozen foodstuffs were is already frozen, thus avoiding a rise in temperature of adequately stored by the retailer; the latter; • be sure that frozen foodstuffs are transferred from the •...
Periods of non-operation Defrost and clean the appliance and all accessories. Leave the lid open to prevent unpleasant smells. When the appliance is not in use for long periods, take the following precautions: Important! If the cabinet will be kept on, ask somebody to Switch off the appliance.
Page 8
Problem Possible cause Solution The lid gaskets are dirty or sticky. Clean the lid gaskets. Food packages are blocking the lid. Arrange the packages in the right way, see the sticker in the appliance. The lid is difficult to open. The lid gaskets are dirty or sticky.
(the maximum power is shown on the lamp cover) Connect the mains plug to the mains socket. Open the lid. Make sure that the lamp comes on. Technical data ZFC623WAL ZFC627WAL ZFC631WAL Dimension of the recess Height...
Connect the wire coloured blue to the terminal either marked with the letter “N“ or coloured black. Connect the wire coloured brown to the terminal ei- ther marked with the “L“ or coloured red. Check that no cut, or stray strands of wire is present and the cord clamp E is secure over the outer sheath.
Need help?
Do you have a question about the ZFC623WAL and is the answer not in the manual?
Questions and answers