Assembling The Belts - Husqvarna Rider 20 ProFlex Operator's Manual

Assembling the belt
1. Position the belt from the front and let the front
end of the belt hang around the hook guard's
handle.
2. Fit the belt on the intermediate pulley and
against the support wheel.
3. Fit the steering plate under the support wheel
and tighten the bolts using two 13 mm socket
spanners.
4. Hook on the spring for the blade brake.
The method of fitting the belt over the front pulley is
described in steps 6–7 under "Fitting the cutting
unit".
34
– English
MAINTENANCE