Section 3: Circuit Requirements; General; Electrical - Grizzly G0528 Instruction Manual

SECTION 3: CIRCUIT REQUIREMENTS

General

If the machine is wired incorrectly a fire
could result. Make sure your wiring, recep-
tacle, plug, and circuit breaker can handle
the current draw of the machine. If you are
not sure that your electrical circuit can han-
dle the current draw, get a qualified electri-
cian to test your electrical system and do
any required upgrades. Do not attempt to
modify an existing circuit by only replac-
ing the circuit breaker with one rated for
a higher amperage draw than the wiring,
receptacle, and plug are rated for.
The Model G0528 power switch (page 16, Figure
13) is designed to accept 2-prong DOUBLE
INSULATED plugs or 3-prong grounding type
plugs. The power switch provides the conve-
nience of switching power to the router at the
front of the router table instead of having to reach
under the table and locate the switch. The power
switch also allows multiple devices such as lights
or vacuums to be powered when the router is
turned ON.
-6-

Electrical

The power switch plugs into a wall outlet that is
properly grounded as shown in Figure 1.
Figure 1. A 3-prong plug and ground outlet.
G0528 Sliding Router Table