Miter; Router To Table - Grizzly G0528 Instruction Manual

Components Needed:
Miter Fence ........................................................1
Miter Plate ..........................................................1
To attach the sliding table:
1.
Secure the miter plate to the sliding table by
sliding the T-bolts into the table T-track.
2.
Position the miter plate in the desired posi-
tion and tighten the threaded star knobs.
Note—Do not worry about precise placement
of the of the miter plate at this time.
3.
Secure the miter fence to the miter plate with
the threaded star knobs (Figure 11).
Figure 11. Installed sliding table fence.
G0528 Sliding Router Table
Qty
-15-