CyberGuard SG300 User Manual page 84

WEP Key Length: This sets the length of the WEP keys to be entered below. It is
recommended to use 128 bit keys if possible.
WEP Key: Enter up to 4 encryption keys. These must be either 10 hexadecimal digits (0
– 9, A – F) for 64 bit keys, or 26 hexadecimal digits for 128 bit keys. You must also
select one of the 4 keys to be the default transmit key.
WPA-PSK (aka WPA-Personal) security method
WPA-PSK (Wi-Fi Protected Access Preshared Key) is an authentication and encryption
protocol that fixes the security flaws in WEP. This is the recommended security method.
WPA Encryption: Select the encryption algorithm, either TKIP (Temporary Key Integrity
Protocol) or AES (Advanced Encryption Standard).
WPA Key: Enter the WPA preshared key, which can be either 8 to 63 ASCII characters,
or 64 hexadecimal characters.
ACL (Access Control List)
To edit access control list settings, click the Edit icon alongside the Wireless network
interface, click the Wireless Configuration tab, then the ACL tab.
Network Setup
80