CyberGuard SG300 User Manual page 238

Command (m for help): p
Disk /dev/sda: 5 heads, 50 sectors, 1024 cylinders
Units = cylinders of 250 * 512 bytes
Device Boot
/dev/sda1
Delete any existing partitions by typing d the entering the partition number, e.g. enter 1 to
delete /dev/sda1.
Create a new partition by typing n then p for primary, then the partition number.
Note
The CyberGuard SG appliance support primary partitions only, so you are limited to four
partitions.
Enter the cylinder for the partition to start on, generally the default is fine. Enter the
cylinder for the partition to end on, or a size for the partition with +(size in mb)M.
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-1024, default 1):
Using default value 1
USB
Start End
1 1024
Blocks Id System
127975 b Win95 FAT32
234