CyberGuard SG PCI Appliances (SG6xx Series)
Note
The CyberGuard SG PCI appliance range includes models SG630 and SG635.
The CyberGuard SG PCI appliance is a hardware based
firewall and VPN server embedded in a 10/100 Ethernet PCI
network interface card (NIC). It is installed into the host PC
like a regular NIC, providing a transparent firewall to shield
the host PC from malicious Internet traffic, and VPN services
to allow secure remote access to the host PC.
Unlike other CyberGuard SG gateway and rack mount appliances, a single CyberGuard
SG PCI appliance is not intended as a means for your entire office LAN to be connected
to, and shielded from, the Internet. Installing a CyberGuard SG PCI appliance in each
network connected PC gives it its own independently manageable, enterprise-grade VPN
server and firewall, running in isolation from the host operating system.
This approach offers an increased measure of protection against internal threats as well
as conventional Internet security concerns. You can update, configure and monitor the
firewall and VPN connectivity of a workstation or server from any web browser. In the
event of a breach, you have complete control over access to the host PC independent of
its operating system, even if the host PC has been subverted and is denying normal
administrator access.
All network filtering and CPU intensive cryptographic processing is handled entirely by
the CyberGuard SG appliance. This has the advantage over the traditional approach of
using a host-based personal software firewall and VPN service by not taxing the host
PC's resources.
Bridged mode
By default, the CyberGuard SG PCI appliance operates in bridged mode. This is
distinctly different from the masquerading behavior of CyberGuard SG gateway and rack
mount appliances.
In bridged mode, the CyberGuard SG PCI appliance uses two IP addresses. Note that
these addresses are both in the same subnet as the LAN, as no masquerading is being
performed (refer to the Masquerading section of the chapter entitled Firewall for further
details).
Introduction
7
Need help?
Do you have a question about the SG300 and is the answer not in the manual?
Questions and answers