CyberGuard SG300 User Manual page 253

You may specify the following access controls for each administrative user.
The Login control provides the user with telnet and ssh access to the command-line
administration interface of the CyberGuard unit
The Administration control provides the user with the ability to make changes to the
CyberGuard unit's configuration via the web-based administration interface. This
should only be provided to trusted users who are permitted to configure and
reconfigure the unit.
The Diagnostic control provides the user with the ability to view restricted diagnostic
information via the web-based administration interface. This access control may be
given to technical support users so they can attempt to diagnose but not fix any
problems which occur.
The Encrypted save / restore all control provides the user to with the ability to save
and restore the configuration of the CyberGuard unit via the Save/Restore page (see
the Save/Restore section earlier in this chapter). This access control may be given to
a technician whom you want to be able to restore the unit to a known good
configuration but to whom you do not wish to grant full administration rights.
System
249