Intel 695AS User Manual page 22

(8) Wake On-LAN/Wake On-Modem Headers (3-pin) : WOL/WOM
This connector connects to a LAN/Modem card with a WAKE ON-LAN/Wake On-
Modem output. This connector power up the system when a wake up signal is received
through the LAN/Modem card.
NOTE: This feature requires that Wake On LAN or Ring In Wake up is enabled.
(9) FAN Speed Headers (3-pin ) : FAN, CPU _ FAN, SYS _ FAN
These connectors cupport cooling fans of 350mA (4.2 Watts) or less, depending on the
fan manufacturer, the wire and plug may be different. The red wire should be positive,
while the black should be ground. Connect the fan's plug to the board taking into
consideration the polarity of connector.
IDE LE D
PWR BTN SMI SW
System Case Connections
WOM
1
5VSB
G ND
WO M
3
Wake-On-Modem Headers
SYS _ FAN
3
1
CPU _ FAN
1
3
FAN
3
1
19
WOL
1
5VSB
G ND
WO L
3
Wake-On-LAN Headers