Onchip Device Function - Intel 695AS User Manual

Disabled
(3BCH/IRQ7)/
(278H/IRQ5)/
(378H/IRQ7)
Onboard Parallel Mode
SPP : Standard Parallel Port
EPP : Enhanced Parallel Port
ECP : Extended Capability Port
SPP/EPP/ECP/ECP+EPP
To operate the onboard parallel port as Standard Parallel Port only, choose "SPP." To
operate the onboard parallel port in the EPP modes simultaneously, choose "EPP." By
choosing "ECP", the onboard parallel port will operate in ECP mode only. Choosing
"ECP+EPP" will allow the onboard parallel port to support both the ECP and EPP modes
simultaneously. The ECP mode has to use the DMA channel, so choose the onboard
parallel port with the ECP feature. After selecting it, the following message will appear:
"ECP Mode Use DMA" at this time, the user can choose between DMA channels 3 to 1.
The onboard parallel port is EPP Spec. compliant, so after the user chooses the onboard
parallel port with the EPP function, the following message will be displayed on the screen:
"EPP Mode Select." At this time either EPP 1.7 spec. or EPP 1.9 spec. can be chosen.

3-7-3 OnChip Device Function

CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
OnChip Sound Function
USB Host Controller
USB Keyboard Support
USB Mouse Support
AC97 Modem Device
↑ ↓ → ← ↑ ↓ → ← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
↑ ↓ → ← ↑ ↓ → ←
F5:Previous Values
OnChip Sound Function
Please refer to section 3-7-3.1
USB Host Controller
Line Printer port 0
Line Printer port 2
Line Printer port 1
OnChip Device Function
Press Enter
Enabled
Disabled
Disabled
Enabled
F6:Optimized Defaults
Menu Level >>
F7:Standard Defaults
34
Item Help
F1:General Help