Introduction; Package Contents - Sentry DCC02 Installation And User Manual

Introduction

Introduction
The SENTRY DCC02 is a second-generation roll-up door automation product
designed for domestic and light industrial applications.
The product is designed to fit most roll-up garage doors that have plastic or metal
spool wheels. It operates by applying a rotational force to one of these spool wheels
which then in turn opens, or closes the door curtain as desired.
The DCC02 system consists of two parts, one of which is the motorised portion, that
drives the door, and fits inside the door curtain roll. This is known as the "head unit".
This part is controlled, electronically, from the wall console. The wall console
contains the power source, and the remote control receiver and includes a courtesy
light and a control button on the front cover. To keep wiring to a minimum, only a
total of three wires are used between the units. This is made possible using a digital
one-wire bus.
The system provides limited battery back-up for mains failure situations. Alerts are
provided for both mains failure and low battery conditions. The system integrates a
learning remote control receiver which is compatible with SENTRY code hopping
remote control transmitters. A maximum of 8 remote controls may be learnt into the
system in total.

Package Contents

Motorised Head Unit
Code Hopping Remote Control (2 pcs)
Masonry anchors
(4 pcs 6x60)
U-bolt mounting kit
6
Power &
Interconnect
cables
Wall Console