System Commissioning - Programming Remotes
System Commissioning - Programming Remotes
Once the desired slot has been selected, operate the desired button on the remote
control, to program it into the system.
Upon successful learning, the wall console will issue two confirmation beeps and
exit learn mode.
To add more remotes, you will need to enter learn mode again and select
the desired slot.
3
Always operate the remote control
at least 5m away from the wall
console when learning it into the
system
Once a remote control (and the chosen button) is learnt into the system
successfully, pressing the learnt button on the remote control will open and close
the door.
Learning another remote control into a given slot will erase the
previously learnt remote control (and button). Be careful!
4
39
Double Beep
Double Beep