Activating And Deactivating Auto-Close - Sentry DCC02 Installation And User Manual

Advanced Features - Auto-Close Selection Advanced Features - Auto-Close Selection
Auto-Close Function Enable/Disable
The auto-close function can be enabled/disabled as follows. Please be aware that
when auto-close is enabled, there MUST be a safety beam present.
Enabling Auto-close Feature
1. Press SET
2. Press LRN
3. Press SET
4. Press TRIGGER
Disabling Auto-close Feature
1. Press SET
2. Press LRN
3. Press LRN
4. Press TRIGGER
TO MAIN MENU
(ADVANCED FEATURES)
AUTO-CLOSE OPTION
MENU ITEM
AUTO-CLOSE OPTION
SUB-MENU
SET
Press and release
SET button
x2
AUTO-CLOSE ON
42
STATUS LED:
1 SHORT FLASH / 2 sec
LRN
Press and release
LRN button
x1
STATUS LED:
AC ON
AC OFF
LRN
Press and release
LRN button
x2
AUTO-CLOSE OFF