Sentry DCC02 Installation And User Manual page 26

Wall Console Installation Wall Console Installation
1
Once the sleeves are
inserted into the wall, the
wall console may be
mounted onto the wall.
Be careful when
inserting the steel screws,
do NOT hammer them in,
use a screwdriver (or
cordless screwdriver) to
gently screw them into
the wall.
Once the wall console is
mounted, ensure that is
secure and cannot be
pulled from the wall or
mounting surface.
For typical masonry
(brick wall) mounting, it
is recommended to
install the nail in
anchors as shown.
The plastic sleeves are
inserted into the wall
first after being drilled
with the hammer drill.
26
2
Note how
screw is
inserted
into keyhole
mounting hole