Unpacking - Barnstead F46110CM Operation Manual

Unpacking

CAUTION
Be sure ambient temperature does
not exceed 104°F (40°C). Ambient
temperatures above 104°F (40°C)
may result in damage to the controller.
Allow at least six inches (15 cm) of
space between the furnace on all
sides and the top. This permits the
heat from the furnace case to escape.
WARNING
To avoid electrical shock, this furnace
must be installed by a competent,
qualified electrician who insures
compatibility among furnace specifi-
cations, electrical source and ground-
ing code requirements. Ensure unit is
properly grounded.
CAUTION
For supply connections, use 8 AWG or
larger wires suitable for at least 90°C.
Failure to observe this caution could
result in damage to furnace.
12
Unpacking
Visually check for any physical damage to the shipping
container. Inspect the equipment surfaces that are adjacent
to any damaged area. Open the furnace door and remove
packing material from inside the furnace chamber. Vacuum
the chamber prior to use to remove the insulation dust due
to shipment. A hearth plate is supplied with the furnace to
be placed on bottom of furnace chamber.
Retain the original packaging material if re-shipment is
foreseen or required.