Declaration of Conformity
NOTE
The Type 46100 and 46200 furnaces do
not come with an electrical cord because
current requirements are too great to be
handled by ordinary electrical cords and
standard wall electrical outlets.
Declaration of Conformity
(-33 models only)
Barnstead|Thermolyne hereby declares under its sole
responsibility that this product conforms with the techni-
cal requirements of the following standards:
EMC: EN 50081-1 Generic Emission Standard;
EN 50082-1 Generic Immunity Standard;
Safety: IEC 1010-1-92 Safety requirements for
electrical equipment for measurement,
control, and laboratory use; Part I:
General Requirements
IEC 1010-2-010 Part II: Particular
requirements for laboratory equipment
for the heating of materials
per the provisions of the Electromagnetic Compatability
Directive 89/336/EEC, as amended by 92/31/EEC and
93/68/EEC, and per the provisions of the Low Voltage
Directive 73/23/EEC, as amended by 93/68/EEC.
The authorized representative located within the Euro-
pean Community is:
European Manager
Barnstead|Thermolyne
Saarbrückener Str. 248
D-38116 Braunschweig
Germany
Copies of the Declaration of Conformity are available
upon request.
11