Grizzly T23092 Owner's Manual page 6

refer to figure 3 and the following
descriptions to gain an understanding of
the features and controls of this spray gun.
Be sure to read the entire manual before
beginning spraying operation to ensure a
safe and efficient experience.
a. fluid control. Controls the volume of
material that travels through the fluid
nozzle and past the atomizer cap.
b. pattern control. Adjusts the spray
output between a round pattern and a
wide fan.
c. storage hook. Allows the spray gun to
be temporarily stored in a vertical posi-
tion to avoid material spills.
d. atomizing cap. Atomizes the mate-
rial as it is sprayed from the nozzle.
Adjusts for horizontal or vertical spray
stroke patterns.
e. fluid nozzle. sprays the material past
the atomizer cap.
Model t23092 high-pressure spray gun
identification & controls
B
A
K
i
figure 3. Model t23092 identification and controls.
J
f. vacuum relief hose. Allows air to
flow into the fluid cup as needed to
prevent a vacuum build-up.
g. fluid cup lock lever. releases/
engages pressure between the cup
hooks and pins.
h. fluid cup. holds the finish material to
be sprayed.
i. cup hook & pin. When pressure is
applied by the lock lever, secures the
lid assembly to the cup.
J. two-stage trigger. stage one only
releases compressed air for blowing
off the work piece. stage two sprays
material. Lightly squeeze the trigger for
stage one or squeeze the trigger all the
way to spray material.
K. air inlet. provides a
tion for the compressed air hose.
C
d
e
F
g
h
⁄ " npt connec-
1
4
-5
-