Grizzly T23092 Owner's Manual page 5

section 3: set up
inventory
your spray gun was carefully packaged for
safe transportation. remove the packaging
materials from around the tool and inspect
it. if you discover the spray gun is dam-
aged, please immediately call Customer
Service at (570) 546-9663 for advice.
save the containers and all packing mate-
rials for possible inspection by the car-
rier or its agent. otherwise, filing a freight
claim can be difficult.
When you are completely satisfied with
the condition of your shipment, inventory
the contents.
model t23092 inventory (figure 1)
a. Fluid Cup ............................................1
b. spray gun Body ................................1
A
figure 1. Model t23092 inventory.
-4
-
prior to assembly and use of the spray
gun, it is essential that all parts be thor-
oughly cleaned and dried. please refer to
cleaning on page 10 for more detailed
instructions.
Make sure all connections are tight enough
to prevent air leaks but not so tight as to
damage the tool.
Attach the gun body to the fluid cup assem-
bly, as shown in figure 2. Make sure the
connection is tight to prevent leaks.
figure 2. Attaching the spray gun body to
B
for the best results, use a hose that
will be dedicated for spray use only.
do not use a hose that has been
used with an in-line oiler or other
possible contaminant. always install
an air pressure regulator between
the air hose and the gun.
Model t23092 high-pressure spray gun
assembly
the fluid cup.