Settings; Feature Settings; Polar S3 Stride Sensor W.i.n.d; Polar Cycling Speed Sensor W.i.n.d - Polar Electro RS800CX User Manual

ENGLISH

7. SETTINGS

Feature Settings

A new sensor purchased as a separate accessory has to be introduced to the training computer. This is
called teaching and takes only a few seconds. Teaching ensures that your training computer receives
signals from your sensor only, and enables disturbance-free exercise in a group. If you have purchased the
sensor and the training computer as a set, the sensor has already been "taught" to work together with the
training computer. You just need to activate the sensor in your training computer.
When you activate a sensor in feature settings,
sensor by selecting . Select
Yes
To teach a separately purchased WearLink transmitter, see Teach a New Transmitter (page ).

Polar s3 Stride Sensor W.I.N.D.

To activate the stride sensor in your training computer, select
.
1/2/3 > On Teach new sensor?
• If your sensor is already taught, select
• If your sensor has not been taught yet, select
Before teaching, make sure that there are no other s3 stride sensors or G3 GPS sensors nearby (40 m/131 ft). The
sensor should be within 1,5 meters/5 ft of the training computer. Before entering a running event, for example,
make sure to perform the teaching process at home, first. This is to prevent interference due to the long-range
data transmission.
To return to time mode, press and hold the STOP button.

Polar Cycling Speed Sensor W.I.N.D.

To activate the speed sensor in your training computer, select
1/2/3 > On > Speed > On
• If your sensor is already taught, select
• To teach a new sensor, make sure that there are no other speed sensors nearby (40 m/131 ft) and then
select .
Yes
After selecting , rotate the wheel a few times to activate the sensor. The flashing red light indicates
Yes
that the sensor is activated.
computer is now ready to receive speed and distance data.
To return to time mode, press and hold the STOP button.
Wheel size settings are a prerequisite for correct cycling information. For more information on measuring the wheel
size, see Measuring Wheel Size.

Polar Cadence Sensor W.I.N.D.

To activate the cadence sensor in your training computer, select
Bike 1/2/3 > On > Cadence > On
• If your sensor is already taught, select
32 Settings
Teach new sensor?
if the sensor has already been taught.
No
is displayed.
.
No
Yes
. is displayed.
Teach new sensor?
.
No
is displayed once the teaching process is over. The training
Completed
.
Teach new sensor?
.
No
is displaeyd. You can teach a new
Settings > Features > Shoes/bikes > Shoe
.
Settings > Features > Shoes/bikes > Bike
Settings > Features > Shoes/bikes >
is displayed.