Mute, Aux 9-10 And L-R-M Masters - ALLEN & HEATH GL2800 User Manual

The MUTE, AUX 9-10 and L-R-M Masters
AUX
AUX
9-10
9-10
STEREO
MONITOR
OO +10
MUTE
MUTE GROUPS
REV
L-R TO M
WEDGE
OO 0dB
MODE
PK! PK! PK!
+6 +6 +6
0 0 0
SIG SIG SIG
MUTE
M
L R
AUX9-10 LISTEN
10 10 10
5 5 5
0 0 0
5 5 5
10 10 10
20 20 20
30 30 30
00 00 00
L R M
GL2800 User Guide
MUTE MASTERS 1-4
assigned to the mute group. Any combination of masters may be
active at any time. The red LED indicates that the master is active.
AUX 9-10 MASTER
Up to +10dB boost is available above the normal 0dB position. Note
that this becomes the LR master in monitor mode.
REV mode switch
Reverses Aux 9-10 rotary master with the L-R
faders, inserts and XLR outputs. Recessed to prevent accidental
operation. Use a pen or pointed object to set the position. In monitor
mode (switch pressed) the stereo aux is controlled by the main faders,
for example to provide a stereo in-ear monitor mix.
Note: LR always feeds the matrix and LR to M controls regardless of
mode. This means the LR mix can still perform a useful function when
the console is configured in monitor mode. The Aux mix is always
monitored by selecting the nearby monitor select AUX 9-10 switch.
AUX MUTE
When pressed the stereo aux (LR) signal is turned off.
The red indicator lights when the channel is muted.
LR to M
Dials the sum of L and R into the M mix to create a mono
output from the stereo mix. You can use this to create a starting point
for a fill or centre mix, and then add selected channels using their M
routing switches. This control always routes the LR signal to M
regardless of mode.
METERS
4 LED bar meters display the post-fade LRM master
signals (FOH mode), or aux 9-10 and engineer's wedge signal
(monitor mode, REV pressed)
LR MASTERS
Separate 100mm faders control the main mix L
and R output levels. They provide +10dB maximum boost. Each
master includes a 4 LED bar meter and a MUTE switch so that L and R
can be separately muted. This is also useful in monitor mode where
these masters carry the Aux 9-10 signals.
M MASTER
A 100mm fader adjusts the level of the M mix. The
master is fully featured and includes a 4 LED bar meter and a MUTE
switch.
WEDGE mode switch
accidental operation during the show. Use a pointed object to set its
position.
FOH mode – In the up position (flush with the panel), the fader is the
master for the main M mix, typically used to feed a mono fill or C
(centre) mix.
Monitor mode - Press to create an engineer's monitor listen wedge
feed from the AFL/PFL mix. It is common to use a wedge speaker of
the same type used on stage to listen to and check the various
monitor mixes being sent to the performers.
group/aux REV function, the GL2800 can be configured as a
compact yet fully featured monitor console.
Press to mute all the input channels
Controls the master level of stereo Aux 9-10.
This switch is recessed to protect it from
Together with the
21