The Agilent N8700 Dc Power Supplies - At A Glance - Agilent Technologies N8700 User Manual

1 Quick Reference
The Agilent N8700 DC Power Supplies – At a Glance
Output Features
System Features
8
The Agilent Technologies Series N8700 System DC Power Supplies
are general-purpose, 2U (two rack units) high, switching power
supplies that are available with a wide variety of output voltage and
current ratings. There are both 3.3 kW and 5 kW models.
These power supplies are power-factor corrected and have flexible
AC input voltage options. Output voltage and current are
continuously displayed and LED indicators show the complete
operating status of the power supply.
The front panel controls allow the user to set the output parameters,
over-voltage, under-voltage, and over-current protection levels, and
preview the settings.
The rear panel includes the necessary connectors to control and
monitor the power supply operation by analog signals or by the built-
in remote communication interfaces.
Constant voltage/constant current with automatic crossover.

High-resolution voltage and current front panel controls.

Accurate voltage and current readback.

Independent edge-triggered external shut-off, and level-

triggered external enable/disable.
Parallel master/slave operation with active current sharing.

Remote sensing to compensate for voltage drop in load leads.

Analog output programming and monitoring.

Built-in GBIB/LAN/USB interface.

A built-in Web server that lets you control the instrument

directly from an internet browser on your computer.
Zero-gap stacking - no ventilation holes at the top and bottom

surface of the power supply.
Active power factor correction.

Fan speed control for low noise and extended fan life.

Series N8700 User's Guide