Built-In Installation For Models Bga131-Bi & Bga132-Bi - DCS BGA131 Use And Care Manual

BUILT-IN INSTALLATION FOR BGA131-BI & BGA132-BI
The Professional Side Burner (BGA131-BI and BGA132-BI) is designed for easy placement into masonry
enclosures. Review the detail drawing below and take into account the provisions shown for the gas
line hook-up clearance in the left rear corner. (Fig. 04)
It is recommended that ventilation holes are provided in the enclosure in the event of a gas leak. The
counter and supporting ledges or deck must be level and flat.
IMPORTANT:
Gas fittings, regulator, and installer shut-off valves must be easily accessible.
Single Side Burner
14 -3/4"
2 "
11- 3/4
10-1/16"
2 "
"
Standard layout for non-combustible only.
12"
A
10 - 1/16"
2" X 2" opening
for gas supply line
FIG.04
9
Dual Side Burner
25 - 1/2"
10-1/16"
22 - 1/8"
25 - 1/2"
MODEL A
BGA131-BI 12"
BGA132-BI 22-3/4"