Adjusting Sharpness [Sharpness]; Setting Enable/Disable For The Automatic Brightness Adjustment Function [Auto Ecoview]; Turning Off The Monitor Automatically [Off Timer] - Eizo RadiForce MX191 User Manual

- Adjusting Sharpness [Sharpness]
This function allows you to emphasize the outline of the image by emphasizing the color
difference between the pixels composing the image and to improve a sense of quality
and materiality. Contrarily, this function allows you to show the image smoothly by
blurring the outline of the image.
Adjustable range: -3 to 3
(1) Press .
The adjustment menu appears.
(2) Select (Screen).
(3) Adjust the sharpness with
(4) Select .
The adjustment is completed.
- Setting Enable/Disable for the automatic
brightness adjustment function
[Auto EcoView]
The sensor on the front side of the monitor detects the environmental brightness to adjust
the screen brightness automatically and comfortably by using the Auto EcoView
function.
(1) Press .
The adjustment menu appears.
(2) Select (PowerSave).
(3) The Enable/Disable setting is toggled by selecting
Enable
Disable
(4) Select .
The mode selected is set.
-6 Turning off the monitor automatically
[Off Timer]
This function allows the monitor to automatically turn off after a specified time has
passed. This function serves to protect the monitor from after-images caused when the
same image is left displayed for a long time. Use this function when an image is
displayed throughout the day.
Adjustable range: Off, 1 to 23h
(1) Press .
The adjustment menu appears.
(2) Select (PowerSave).
(3) Set a monitor OFF time with
Select "Off" to set Off timer setting to "Off".
(4) Select
The Off timer setting is completed.
(5) "Power will shut off in a minute" appears on the display if it becomes one
minute before the setting time.
If you select (Extend), the off timer function works 90 minutes later.
0
Chapter 2 Settings and Adjustments
of (Sharpness).
or
(Auto EcoView).
of (Off Timer).
or
Attention
• This function is not available in the
DICOM-CL and CAL modes.