Maintenance - CyberPower OL6000ERT3UD User Manual

Ups
Hide thumbs Also See for OL6000ERT3UD:
Table of Contents

Advertisement

Storage
To store your UPS for an extended period, cover it and store with the
battery fully charged. Recharge the battery every three months to ensure
battery life.
Battery Replacement
Please read and follow the Safety Instructions before servicing the
battery. Battery replacement should be performed by trained personnel
who are familiar with the procedures and safety precautions. Make a note
of the replacement Battery module number.
Safety Precautions
CAUTION!
Only use replacement batteries which are certified by
CyberPower Systems. Use of incorrect battery type is an electrical
hazard that could lead to explosion, fire, electric shock, or short circuit.
CAUTION!
Batteries contain an electrical charge that can cause
severe burns. Before servicing batteries, please remove any conductive
materials such as jewelry, chains, wrist watches, and rings.
Battery Installation
Step 1: Remove the front panels
Step 4: Insert the battery connectors and tighten the screws of battery retaining cover
Copyright © 2011 CyberPower Systems, Inc.

MAINTENANCE

CAUTION!
harmful to the skin/eyes and may be toxic.
CAUTION!
the wall receptacle before servicing the battery.
CAUTION!
metal parts on top of the UPS or battery terminals.
Replacement Batteries
Please refer to the front side of the Battery module for the model number
of the correct replacement batteries. For battery procurement, log onto
www.CPSww.com, or contact your local dealer.
Battery Disposal
Batteries are considered hazardous waste and must be disposed of
properly. Contact your local government for more information about
proper disposal and recycling of batteries. Do not dispose of batteries
in fire.
Step 2: Remove the retaining screws from
the cable protection cover and then remove
the cover itself
18
Do not open or mutilate the batteries. Electrolyte fluid is
To avoid electric shock, turn off and unplug the UPS from
Only use tools with insulated handles. Do not lay tools or
Step 3: Pull the battery trays out slowly and
then put the new battery trays back into the
compartment
Step 5: Install the front panels

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ol10000ert3udOl8000ert3ud

Table of Contents