Table of Contents
Advertisement
Configure Submenu
Output Voltage
Sync Freq Window
Bypass V Window
Bypass Condition
ECO Mode**
Manual Bypass
Battery Test
Audible Alarms
EBM Number
Wiring Fault
NCL Control
Language
Generator Mode***
Communication
Dry Relay Set
Converter Mode****
Screen Saver
Clear Event Log
Button OFF LOCK
Charger Function
*) Output voltage default setting depends on different nation or order requested.
**) This function can't be set when Manual Bypass, Generator Mode or Converter Mode is enabled.
***) UPS has no bypass when Generator Mode is enabled.
****) UPS has no bypass when Converter Mode is enabled. This function can only be set before the UPS is on.
SILENCING AUDIBLE ALARMS
1.
Press any of four function buttons on the LCD module; Note: the alarm can not be turned off for a
condition. This condition will still result in an audible alarm.
"Audible
2.
Configure
MANUAL BATTERY TEST
"Battery
Test" as "Active" on the LCD module; and it will perform the
Configure
Copyright © 2011 CyberPower Systems, Inc.
LCD SETUP FUNCTIONS
Available Settings
= [200V] [208V] [220V] [230V] [240V]
Range= [+/- 1%] [+/- 2%] [+/- 3%] [+/- 4%] [+/- 5%]
[+/- 6%] [+/- 7%] [+/- 8%] [+/- 9%] [+/-10%]
Range= [+10%/-10%] [+10%/-15%] [+10%/-20%]
[+15%/-10%] [+15%/-15%] [+15%/-20%]
[Check Freq/Volt] [Check Volt Only] [No Bypass]
[Disable] [Enable]
[V Range= +/-15%] [V Range= +/-10%] (for [Enable])
[Disable] [Enable]
[Activate?]
[Disable] [Enable]
= [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10]
[Disable] [Enable]
[Outlet On] [Outlet Off]
[English] [Deutsch-German] [Fran
[Disable] [Enable]
[Disable] [Enable]
[I/P Power Fail] [Battery Low] [Summary Alarm]
[UPS On Bypass] [UPS Fail]
[Converter Off] [O/P Freq = 50Hz] [O/P Freq = 60Hz]
[Disable] [1 Minutes] [5 Minutes]
[Activate?]
[Disable] [Enable]
[SBM] [Constant]
Alarms" as "Disable" on the LCD module and it will stop warning of any malfunction audibly.
ç
ais-French]
"Manual Battery
16
Default Setting
230V*
+/- 5%
+10%/-15%
Check Freq/Volt
Disable
V Range= +/-10%
Disable
None
Enable
0
Enable
Outlet On
English
Disable
Enable
I/P Power Fail
Converter OFF
5 minutes
None
Disable
SBM
"Battery
Test"
Low"
Advertisement
Table of Contents
