Hardware Identification Chart - Stamina Elite Total Body Owner's Manual

HARDWARE IDENTIFICATION CHART

This chart is provided to help identify the hardware used in the assembly process. After unpacking the unit,
open the hardware bag and make sure that you have the following items:
3/16"
0 1/2
0 10 20
6
Length
NOTE: Some of the hardware items listed may be attached to other parts.
1/4" 5/16"
1 1/2 2
30 40 50
8 10
Part No. and Description
79
99
96
97
85
80
74
98
3/8" 1/2"
1/2 3 1/2
60 70 80 90
12 Place washers, the end of bolts or screws on the
circles to check for the correct size. Use the small
scale to check the sizes of bolts and screws.
Carriage Bolt (M8 x 1.25 x 85mm)
Carriage Bolt (M8 x 1.25 x 50mm)
Bolt, Hex Head (M8 x 1.25 x 40mm)
Bolt, Hex Head (M8 x 1.25 x 15mm)
Bolt, Scoket Head (M8 x 1.25 x 50mm)
Nylock Nut (M8 x 1.25)
Washer (M8)
Set Screw (M6 x 1 x 15mm)
5
INCHES
4 1/2 5
100 110 120 130 140 150
MILLIMETERS
1/2 6
in.
mm.
Qty
4
2
4
4
3
10
2
2