Plan Your Installation - Kenmore 625.385010 Owner's Manual

PLAN YOUR INSTALLATION

It is recommended to read through the entire manual
before beginning your installation. Follow all steps
exactly. Reading this manual will also help you get all
the benefits from your system.
TYPICAL UNDER SINK LOCATION
The Advanced Two-Stage Drinking Water Filter housing
is normally located under the kitchen and/or bathroom
sink, to filter the cold drinking water. See Figure 2.
CHECK SPACE REQUIREMENTS
Check size and position of items for proper installation
into location chosen.
TOOLS NEEDED
Review the tools needed list. See Figure 1. Gather need-
ed tools before proceeding with the installation. Read
and follow the instructions provided with any tools list-
ed here.
IMPORTANT: A 1-1/4" dia. hole is needed to mount the
filtered water faucet. To avoid damaging the sink, con-
sult a qualified plumber or installer for drilling proce-
dures in porcelain or stainless steel.
Filter Housing may be placed horizontally OR vertically
Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com
Plan Your Installation
Typical Under Sink Installation
SINK
cold water
supply fitting
cold shutoff
Phillips Screwdriver
Drill & 1-1/4" bit, if required
Large Adjustable Jaw Pliers or Pipe Wrench
filtered water
faucet
blue tubing
WATER OUT
yellow tubing
WATER IN
Tools Needed
Adjustable Wrench
Figure 1
Figure 2
5