Microtek ArtixScanDI 6240S User Manual page 52

5. Follow the instructions described in the step 3 and 4 to change a new roller
6. After done, push the roller cover up until you hear a "click".
Note:
•
•
52 ArtixScan DI 6240S/6250S/6260S & ArtixScan TS 630S User's Manual
for the roller at the bottom.
a) Remove the old roller from the bottom
b) Insert a new roller at the bottom
The recommended replacement point for your Feed Roller Assembly is after
scanning approximately 100,000 scans through the feeder.
Please contact your local resellers for purchasing new Feed Roller Assembly.
In order to avoid breaking
down the levers at the corners
of the roller cover, remember
to push them downward
slightly when push the roller
cover back.