Microtek ArtixScanDI 6240S User Manual page 29

Scanning
settings
Image
type
Image
correction
settings
For preview purposes only, take note of the additional notes below:
1. Load a piece of paper from the paper stack into the Document Feed Tray as step 1. Do not
load more than one sheet, as a single sheet is sufficient for previewing.
2. After finishing step 3 and before proceeding to step 4, click the Preview button to perform a
preliminary view of the entire image. When done, a preview image appears in the preview
window.
At this moment, the previewed page is delivered to the output tray from the Document Feed
Tray. Load the previewed page, along with the paper stack into Document Feed Tray. You are
now ready to scan.
For preview
purposes only
Preview window
ArtixScan DI 6240S/6250S/6260S & ArtixScan TS 630S User's Manual
Scan frame
(enclosed by
dotted lines and
labeled with the
tag "Main")
Preview image
(the enclosed
frame bordered
in red)
29