Repeat Play; Displaying The Text; Imprint Operation (Optional); Changing Multeq Mode - Alpine CDA-105Ri Owner's Manual

Repeat Play

Only Repeat One is available for the iPhone/iPod.
Repeat One:
A single song is repeatedly played back.
1
Press 4.
The song is played back repeatedly.
(off)
(Repeat One)
2
To cancel repeat play, select (off) with the above
procedure.
• During repeat playback, no other songs are selectable by pressing
or .

Displaying the Text

You can display the tag information of a song in the iPhone/iPod.
Press VIEW.
Each press changes the display.
• When the TEXT SCROLL is set to MANU, press and hold VIEW for
at least 2 seconds, the current text will be scrolled one time.
TRACK NO./ELAPSED TIME
ALBUM NAME* SONG NAME*
TRACK NO./ELAPSED TIME
* TAG information
"ARTIST"/"ALBUM"/"SONG" is displayed if there is no tag
information.
• Only alphanumeric characters (ASCII) can be displayed.
• If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the
adapter. Therefore, a maximum of 70 characters is recommended.
The maximum number of characters for the head unit is 70 (70 byte).
• Some characters may not be correctly displayed.
• "NO SUPPORT" is displayed if text information is not supported by
the unit.
ARTIST NAME*
IMPRINT Operation
(Optional)
Alpine introduces IMPRINT - the world's first technology that
thoroughly eliminates in-car acoustic problems that normally degrade
sound quality, which enables us to experience music the way the artist
intended, refer to "About IMPRINT" (page 32).
When the IMPRINT audio processor (PXA-H100) (sold separately) is
connected to this unit, MultEQ and the following sound adjustment can
be performed.
Rotary encoder
SOURCE/
BAND/TA /ENT

Changing MultEQ mode

MultEQ, developed by Audyssey Labs, automatically corrects the audio
for the listening environment. The system is optimized for selected
positions in the vehicle. To accomplish this, MultEQ must take
measurements of the vehicles response characteristics. For details on the
set up procedure, consult your authorized Alpine dealer.
Press and hold IMPRINT for at least 2 seconds to
change MultEQ mode.
MULTEQ OFF (Manual Mode)
CURVE 2 (MultEQ-2) MULTEQ OFF (Manual Mode)
• The Curve mode can be selected only when curve 1 and curve 2 are
stored.
• When using MultEQ, MEDIAXPANDER, MX LEV MODE,
CROSSOVER, T.CORR PARA, FACTORY'S EQ, SUBW PHASE,
SUBW CHANNEL, TW SETUP, EQ MODE, FILTER TYPE and
PARAMETER EQ/GRAPHIC EQ are set automatically. They are no
longer user adjustable.
• When an external audio processor is connected, the MultEQ function
cannot be used.
/ESC
IMPRINT
Preset buttons
(1 through 6)
CURVE 1 (MultEQ-1)
25
-EN