Using The Aux; Switching The Aux Mode On And Off - Eclipse AVN4400 Owner's Manual

How to operate portable audio devices

Using the AUX

The portable audio player can be operated by connecting it to this receiver using the Ei-LAN.
IMPORTANT
● While the AUX mode is activated, actions such as turning off the audio player or pulling out the
connection cord may cause noise spikes that can damage the system speakers. Be sure to
avoid this possibility by turning off system power or switching from the AUX mode to another
mode before shutting off or disconnecting the portable audio player.
● Audio output levels will differ for the various devices that can be connected by this method.
Carefully adjust the volume until the output level of the connected player is known.
● Before using a portable audio player inside a vehicle, read the player's operation manual
carefully and confirm you will be able to easily operate the device in the vehicle before
proceeding.
● When you connect an optional cable (AUX105) to this receiver, other optional equipment that
uses Ei-LAN will not be able to be connected.
SRC
Switching the AUX Mode
ON and OFF
Hold down the [SRC] button for 1 or
1
more seconds to turn the audio mode
Off.
Hold down the [CTRL] button for 1 or
2
more seconds.
75
Touch
3
Enable AUX
on the PND display.
● Checked: AUX setting ON
Not checked: AUX setting OFF
4
Touch .
Next
5
Touch .
Done
that appears
75