Gobo Replacement - American DJ Accu Spot Pro User Instructions

Accu Spot Pro
Channel Value
11
160 - 191
192 - 223
224 - 255
12
0 - 255
13
0 - 225
226 - 235
236 - 245 BLACKOUT BY ALL WHEEL CHANGE
246 - 255
14
0 - 19
20 - 39 COLOR CHANGE TO ANY POSITION
40 - 59
60 - 79
80 - 99
100 - 119
120 - 139
140 - 159
160 - 179
180 - 199
200 - 219
220 - 239
240 - 255
American DJ - www.americandj.com - Accu Spot Pro Instruction Manual Page 45
®
DMX Traits cont.
Function
SHUTTER & STROBE CONT.
SHUTTER OPEN
RANDOM STROBE EFFECT
SLOW - FAST
SHUTTER OPEN
DIMMER (INTENSITY)
INTENSITY
0% - 100%
SPEED OF PAN/TILT MOVEMENT
SPEED MAX - MIN
BLACKOUT BY MOVEMENT
NO FUNCTION
LAMP ON/OFF, RESET,
INTERNAL PROGRAMS
COLOR CHANGE NORMAL
LAMP ON
LAMP OFF
ALL MOTOR RESET
INTERNAL PROGRAM 1
INTERNAL PROGRAM 2
INTERNAL PROGRAM 3
INTERNAL PROGRAM 4
INTERNAL PROGRAM 5
INTERNAL PROGRAM 6
INTERNAL PROGRAM 7
SOUND ACTIVE
Accu Spot Pro
Caution! Never open the unit when in use. Always disconnect
the main power before attempting to change the gobos.
1. Remove the bottom half of the moving head to access the
gobo wheels.
2. First, Remove the front lens plate by unscrewing the 3 phil-
lips screws. After, unscrew the four phillips screws that hold
the bottom half of the head shell in place. There are two
screws located in the front and two in the rear
3. When you remove the shell you will be able to access the
gobo wheels. Turn your desired gobo wheel with your hand
until you come across the gobo you would like to change.
4. Static Gobo Wheel: With your finger push the gobo out
towards the back and then slide the gobo up and out of the
wheel.
Remove the retainer ring from the gobo frame and remove
the gobo. Insert your new gobo into the frame and replace
retainer ring. Slide the new gobo into place and reassemble
the shell.
Note: Remove the retainer ring using your finger nail or flat
head screwdriver.
Rotating Gobo Wheel: Remove the retainer ring and push the
gobo out, towards the front of the fixture. Insert your new
gobo and replace the retainer ring.
5. Change the gobo by sliding the new gobo into place and
reassemble the shell.
American DJ - www.americandj.com - Accu Spot Pro Instruction Manual Page 46
®

Gobo Replacement