Fuse Replacement - American DJ AVIATOR-SP8 User Instructions

Hide thumbs

Table Of Contents

Table of Contents

AVIATOR SP-8™

2. Use the Edit button to select the

channel you wish to make adjustments

to. Each tap will increase the channel

by a factor of one. Pressing and holding

down the Edit button will scroll through

the channels rapidly.

3. While pressing and holding down the

Edit button tap the Store button to change

channel state between "Off" and "Full

On". Each tap of the Edit button changes

the state from "Off" to "Full On."

When a channel is set to "Off," the LCD will read "o" in the last

character of the LCD. When a channel is set to "Full On," the LCD

will read " F" in the last character.

"Full On" ("F") will give a channel full output (intensity) regardless

of any contradicting DMX signal. "Off" ("o") will cut all output

voltage to a selected channel regardless of DMX signal.

4. Once you have completed your adjust-

ments, tap the Store button. The LCD will

display "Stor" for approximately 2 sec-

onds. This will store your DMX channel

value in to the unit's built-in memory.

American DJ Supply

www.americandj.com AVIATOR SP-8™ Instruction Manual Page 13

Operation

AVIATOR SP-8™

Power Input........................................................AC 120v~50/60Hz

Channel Output..........................................................10A per a channel

Total Channel Output.........................................................30A Maximum

DMX Output................................................................3 pin female XLR

DMX Input......................................................................3 pin male XLR

Channel Fuse........................................................................6 Amp GMA

Dimensions......................................................330mm x 192mm x 65mm

Weight...............................................................................2.9kg/6.5Lbs