Introduction English Dear Music Lover, Thank you for your decision to acquire these very special Dynaudio Evidence loudspeakers. They feature advanced Dynaudio loudspeaker technology, resulting in music reproduction at a very high level, making many familiar recordings a new listening experience altogether.
Additional information is provided, which is important to fully understand the loudspeakers and how to operate it. The arrow will identify steps to be performed. Please follow the instructions carefully. Multiple steps that should be performed consecutively are numbered. Please follow these instructions carefully. Dynaudio Evidence...
Unpacking the Loudspeakers Unpacking the Loudspeakers Dynaudio Evidence models are protected during transit by stable and secure packaging. Due to their weight and dimensions, they are shipped in a special wooden crate. CAUTION HEAVY PARTS Unpacking the Evidence loudspeakers without help may cause personal injuries or product damage.
• Please ensure that the positive and negative cables do not make contact with each other. • Tighten the posts, and check the contact after a few days to make sure that it hasn’t loosened. Fig. 2 Binding posts at rear of cabinet. Dynaudio Evidence...
The impact a loudspeaker cable can have on sound quality may be dramatic, though in general quality cable products will yield a quality result. Dynaudio loudspeakers are designed to be very neutral and thus are not extremely suited to any particular type of cable.
A ≤ B • Paying attention to the image during listening tests will help dictate optimum placement during experimentation and set-up. Fig. 4 Positioning the loudspeakers. Dynaudio Evidence...
0.5 meter. Floor-standing loudspeaker set-up Dynaudio feature a special base construction, which offers both an ideal performance and mechanical basis. Integrated into the base plinth are four individual spike assemblies. D ≥ 0.5 m These stabilize the cabinet on an extremely small contact area, and therefore prevent any wobbling while offering optimal resonance control.The individually adjustable spikes allow...
Depending on your personal listening environment and room dimensions, loudspeakers may be angled in towards the listening area to focus the sound radiation. This positioning will typically improve imaging and is especially recommended by Dynaudio (see Fig. 6). Room and furniture influence The sound quality of any loudspeaker is influenced by the furniture, wall materials and other objects in the listening room.
Multi-Channel Setup Multi-Channel Setup Dynaudio loudspeaker models are designed to offer the most advanced performance in both stereo and multi-channel applications. When connecting a loudspeaker to a multi- channel setup, in general the same guidelines as mentioned in the text above will apply.
The position of the subwoofer will be dependent upon the size of the room and its acoustics. Dynaudio recommends placing the subwoofer close to the front speakers, but not too close to any walls, corners or furniture. This helps to sonically integrate the subwoofer in the existing surround channel setup.
Any damage caused under such circumstances is not covered by the Dynaudio warranty and is easily avoided in the first place by consulting your Dynaudio dealer for advice regarding the choice of amplifier.
Remove dust on the woofer diaphragms with a fine furniture brush. All materials used by Dynaudio are integrated with exceptional care. By taking care of your loudspeakers, you will preserve the finish and build quality for a very long time.
Technical Specifications Technical Specifications Evidence Master Evidence Temptation Evidence Center Sensitivity (2.83 V/1 m) 92 dB 90 dB 90 dB IEC Long Term Power Handling > 600 W 500 W 350 W Impedance (nominal) 4 Ohm 4 Ohm 4 Ohm...