Selecting a hub (HUB) Selecting an input on the hub (INPUT) Right and left loudspeaker Each Focus XD loudspeaker is constructed by Dynaudio’s master craftsmen in Denmark Distance to walls Adjusting the volume to these high standards of quality. To realize the highest sound quality from the Focus XD...
Do not operate defective loudspeakers and disconnect defective loudspeakers from accompanying the product. the mains voltage. Please contact your Dynaudio distributor if you have any problems. Distributor addresses can be found in the Internet at www.dynaudio.com. Indicates (in combination with a safety sign) a potentially hazardous situation which, if not Use the supplied power cable to connect the loudspeakers to the mains voltage.
Dynaudio distributor. the spikes may cause injuries and damage sensitive surfaces like hardwood flooring or tile. Distributor addresses can be found in the Internet at www.dynaudio.com. ► Be careful when handling the loudspeakers.
The compact Focus models are designed to offer exceptional performance while taking up services provided by your Dynaudio distributor to fully exploit the sound potential of your minimal space. Due to adverse effects to the sound quality, compact loudspeakers should loudspeakers in your own listening room.
This positioning original music signal. Thus, when loudspeakers are positioned too close to walls, the sound will typically improve imaging and is especially recommended by Dynaudio. However, you quality can be restricted. Focus XD loudspeakers were developed to be placed free- are free to select the precise position based on your personal listening habits.
Connection and control elements Connections This section describes the connections and control elements CONNECTIONS AND CONTROL ELEMENTS for the components. Please contact your Dynaudio distributor and control Digital connection. IN = input, OUT = output Digital Audio if you have any problems with connection and start-up.
24 bits/96 kHz. DIRECT Direct selection • Both loudspeakers are operated wirelessly via a Dynaudio Hub or Connect box with = toggle between digital and analog input signal processing of 24 bits/96kHz. = switch the display on/off INPUT...
2. On the rear side of the housing, loudspeakers function as a power loudspeaker. established by either a Dynaudio Hub or select the red, green, or blue 1. Connect the left analog output from amplifier; volume is controlled via the 2.
Owner's Manual Focus XD dynaudio.com/focusxd Adjusting the loudspeaker’s sound / Connecting the voltage supply Adjusting the Connecting the ► The sound of Focus XD loudspeakers can –– Neutral: free-standing loudspeaker (no Use the supplied power cable to To switch a loudspeaker out of be adjusted by increasing or lowering high change to sound).
Optionally, the loudspeakers can also be Fixed Volume ► ► operated with a Dynaudio Hub or Connect Press and hold the MUTE button to Briefly pressing the MUTE button on box. For details on operation via Hub or set the volume to a fixed, high level.
Page 12
Owner’s Manual Focus XD dynaudio.com/focusxd Display meanings LED DISPLAY MEANINGS LED DISPLAY MEANINGS Hub or Connect connection Displaying the selected Hub or Connect The bottom LED is flashing red. There is no active Hub or Connect, or no One of the three LEDs flashes.
Technical data LED DISPLAY MEANINGS LOUDSPEAKERS FOCUS 20 XD FOCUS 30 XD FOCUS 60 XD Volume, mute Frequency range (± 3 dB) 39 Hz – 24 kHz 29 Hz – 24 kHz 18 Hz – 24 kHz A number of white LEDs are illuminated.
Should warranty service may damage the cabinet surface or other diaphragms with a fine furniture brush. be required, it must be arranged for in the country of purchase by an authorized Dynaudio speaker parts. dealer.
Page 15
Focus XD Designed and engineered by Dynaudio Labs in Denmark Dynaudio A/S 8660 Skanderborg Denmark www.dynaudio.com Focus XD - Owner’s manual, version 10/17. All text and image copyrights reserved. Subject to change without notice.