Grizzly T10097 Instruction Manual page 15

angle guide
the model t10097 Wet grinder comes
with an angle guide to help identify and
maintain the cutting angle on a variety of
tools.
to use the angle guide:
1. locate the eight measuring notches on
the angle finder (figure 10).
angle edge
figure 10. measuring notches.
model t10097 Wet grinder
Workpiece
desired
angle notch
measuring
notches
2. Find the angle notch that best fits the
tool you wish to grind by placing the
beveled edge of the workpiece into
each notch until you find the notch that
most closely matches the angle of the
beveled edge.
3. place the angle guide on the wheel
with the desired angle notch (found in
step 2) against the wheel and adjacent
to the universal support (figure 11).
desired
angle edge
angle notch
figure 11. angle guide usage.
4. adjust the positioning of the workpiece
and the universal support height as
necessary so that the sharpened edge
of the workpiece is flat against both the
grinding wheel and the angle edge on
the angle guide as shown in figure 11.
For precision grinding attachments,
see accessories on page 18.
Correct
grinding angle
Workpiece
-15
-