SECTION 6: MAINTENANCE
Maintenance Safety
Your safety is important! Please follow the
warnings below during this entire section:
Serious personal injury
could occur if you con-
nect your machine to
the power source dur-
ing the maintenance pro-
cess. DO NOT connect
the machine to the power
source while performing
any maintenance on this
machine.
Loose hair and cloth-
ing could get caught in
machinery and cause
serious personal inju-
ry. Keep loose clothing
rolled up and long hair
tied up and away from
machinery.
Projectiles
machine could cause
serious
Wear safety glasses at
all times.
H7761 2" x 27" Belt & 6" Disc Combo Sander
from
the
eye
injury.
Schedule
Before Each Use:
•
Tighten back stop, table or guard knobs.
•
Replace any worn or damaged sanding discs
or belts.
•
Check for worn or damaged wires.
•
Check for any other condition that could
hamper the safe operation of this machine.
After Each Use:
•
Turn OFF machine.
•
Wipe off the sawdust build-up from the table
surface.
Weekly Maintenance:
•
Wipe a lubricant such as SLIPIT
table.
Long-Term Storage:
•
Keep unpainted surfaces rust free with prod-
ucts such as Boeshield
onto the
®
T-9.
®
-21-