Lcd Display - Ultra Start 42 series Owner's Manual

Advanced 2-way remote starter/alarms
Hide thumbs Also See for 42 series:
Table of Contents

Advertisement

REMOTE VEHICLE STARTER

LCD DISPLAY

Programable Icons-
display are user/dealer programmable (see page 17 to enter).
TIMER ICON- When the vehicle starts in Timer Mode, this icon will
appear in conjunction with the usual icons that indicate that the vehicle
is running by the remote starter.
TELEPHONE ICON- N/A
KEY ICON- This icon is displayed if the ignition key is in the "ON" position or if
the system detected a start fault.
NOTE: The start fault must be corrected before the remote starter will activate
again (see page 19 for diagnostic codes).
NUMBER ICON- This icon is displayed to indicate First car or Second
car remote transmitter operations.
SIREN ICON- If the icon is displayed, the siren will work normally. If
the icon is not displayed, the siren delete feature is ON and the siren will
not be active if a button is pressed on the remote transmitter.
NOTE: Panic and car finder will still be active.
SHOCK SENSOR ICON- N/A
SERVICE MODE ICON- This icon indicates the status of the Service
Mode feature. If this icon is present, the system is in Service Mode.
?
NOTE: In Service Mode, keyless entry and optional features will still
The six squares found at the bottom of the
function.
OWNER'S MANUAL
PAGE 17

Advertisement

Table of Contents
loading

This manual is also suitable for:

43 series

Table of Contents