Operation; Playing Music; Selecting Music - Linn Majik DS Owner's Manual

MAJIK DS
OWNER'S MANUAL

OPERATION

Playing music

If you are using a Linn pre-amplifier with the Majik DS, switch on the
pre-amplifierl first and wait for it to show the
powering-up the Majik DS. When the Majik DS is switched on, a flashing dot
will appear on the display. Wait until the dot is replaced by the
before following the steps below.

Selecting music

1. Turn on your control device. If the Linn GUI does not run automatically,
double-click the Linn GUI icon.
2. From the Room window, select the appropriate room. This will
automatically bring your Majik DS (and Linn pre-amplifier) out of standby.
(standby) symbol before
symbol
3. From the Source window, select 'Majik DS'.
4. From the Library window, select the storage device that contains the
music you want to listen to by tapping it twice.
3
w ww.l i nn .c o .u k