Operation; Playing Music; Selecting Music - Linn AKURATE DS Owner's Manual

OPERATION

Playing music

If you are using a Linn Akurate Kontrol pre-amplifier with the Akurate DS,
switch on the Akurate Kontrol first and wait for it to show the
symbol before powering-up the Akurate DS. When the Akurate DS is
switched on, a flashing dot will appear on the display. Wait until the dot is
replaced by the symbol before following the steps below.

Selecting music

1. Turn on your control device. If the Linn GUI does not run automatically,
double-click the Linn GUI icon.
2. From the Room window, select the appropriate room. This will
automatically bring your Akurate DS (and Akurate Kontrol) out of
standby.
3. From the Source window, select 'Akurate DS'.
(standby)
4. From the Library window, select the storage device that
contains the music you want to listen to by tapping it twice.
3
AKURATE DS