Setting Up Your Gizmondo; Planning Your First Trip - ALK GIZMONDO NAVIGATOR 2006 COPILOT User Manual

MANUAL
Setup your Gizmondo and Charge the battery
Follow the nstructions in the Gizmondo Quick Start Guide
Insert your Gizmondo Navigator SD Card
Insert your Gizmondo Navigator 2006 SD Card into the slot in the base of your Gizmondo with the label towards the back of
the device.
When the SD card is inserted the autorun menu is displayed. Selecting 'Run Application'will launch Gizmondo Navigator. If
'Back' is selected from the autorun menu or you have exited Gizmondo Navigator and wish to re-launch it then you must
select Applications from the home page followed by 'Run Application'.
Gizmondo Navigator will start running and the Welcome screen will be displayed.

Planning your first trip

Gizmondo uses its built-in GPS satellite receiver to calculate your exact position so you don't have to enter your starting point.
Just key in your destination(s) and Gizmondo will take you there, providing spoken turn instructions all the way.
You will need a GPS fix for Gizmondo Navigator to calculate your route and provide navigation guidance. Please ensure that
your Gizmondo has a clear line of sight to the sky, for example by placing on your dashboard.
For IN-VEHICLE HARDWARE SETUP:
See Gizmondo Navigator Overview, p. 1.
Tip: You will not be able to get a GPS fix inside a building. Please note that it may not be possible to acquire a GPS fix in
certain vehicles with metallic heated windscreens.
-2-