Table of Contents
Advertisement
MANUAL
Trip Editing and Waypoints
To get to the Going To screen from the guidance screens at any time, use the D-pad to scroll up to the
Going To
icon in the
Going To
menu bar on the left hand side of the screen. Select
and press
. From here you can edit the current trip, add
additional stops, or start a new trip.
delete
delete all
Select any stop on your itinerary and press
to open a pop-up menu that lets you
a stop,
stops in your
map
move it up or down
itinerary, zoom to it on the
(as described on p. 5) or
to change the stop order. This menu also lets
Set as Waypoint
you designate a stop as a "waypoint" (select
). Waypoints are not considered as stops in the Itinerary, their
purpose is to guide Gizmondo Navigator's route calculations along roads that you choose.
Set as Stop
To change a waypoint back to a stop, choose
from the menu. Waypoints appear with ">>" instead of a stop
number on the list of destinations.
Gizmondo Navigator ignores waypoints when calculating the ETA and distance to the next stop, so settings waypoints can be
used to get the ETA and distance to a stop that is not your next stop.
Going To
button.
-19-
Advertisement
Table of Contents
