Selective Routing - ALK GIZMONDO NAVIGATOR 2006 COPILOT User Manual

Selective Routing

Gizmondo Navigator allows you to be selective about the roads you take on your trip.
There are two ways to do this: 1) you can customise your Trip Itinerary in Guidance Mode so that Gizmondo Navigator will
avoid certain roads; or 2) you can guide Gizmondo Navigator's route by entering stops as "waypoints".
Avoiding a Road in the Trip Itinerary
1. Itinerary
Select the icon from the menu bar in the left hand side of the screen. Press
on your Gizmondo.
Tailoring Your Route Using Waypoints
Gizmondo Navigator lets you customize a route by designating some stops as "waypoints". Waypoints appear on the Itinerary
but they're not treated like stops in Guidance Mode and or in routing instructions. You can enter a waypoint along a road you
want Gizmondo Navigator to use, and Gizmondo Navigator will guide you through the waypoint toward your destination.
To designate a place as a waypoint, enter it as a stop in the
Going To Select/ Accept,
list, press
Going To
the list preceded by ">>" instead of a stop number. To turn the location into a stop again, repeat and choose
as Stop.
You can set as many waypoints as you like on a trip; however, Gizmondo Navigator will always recognise the last
address in the Going To list as a stop.
2. rewind
Use the
up and down in the check boxes, in the left hand side column, to select a
specific road you want to avoid.
3.
Simultaneously, use the D-pad to select the
Avoid Road option from the Divert menu. Press
the road selected. Gizmondo Navigator will calculate a new route that avoids
that road.
If there is no other possible road or if the alternate route is too impractical, a
new route won't be generated.
Repeat steps 2-3 above to avoid other roads listed in the Itinerary.
4. To Return to the Original Route:
that Gizmondo Navigator gave you at any time by tapping the
icon from the Divert menu.
Going To
Set as Waypoint
choose
-22-
fast forward
and buttons to move the
Divert
You can return to the original route
screen. Using the D-Pad, highlight the location on the
from the dialogue box displayed. Waypoints appear on
MANUAL
Play/ Accept button
tick
icon and choose the
Play/ Accept to avoid
Allow Road
Set