Installation - Samsung SCV-2120 User Manual

Installation

Installation
Notes
• T heinstallationshouldbedonebyqualifiedservicepersonnelorsysteminstallers.
• I ftheceilingmaterialisnotstrongenoughtoholdtheinstallationscrews,thecamera
mayfalloff.Reinforcetheceilingasneeded.
• T akecarenottodroptheproductduringinstallation.Donotallowanyonetostand
belowtheinstallationarea.
1. Remove the dome cover and inner cover from the main body by loosening the three
dome cover screws.
2. And then remove the main body from the mounting bracket by the four main body screws.
Adjust the panning, tilting and rotate mechanism while checking the position on the monitor
145°
170°
Pan Base
-170°
COLOR DOME CAMERA
Mounting Bracket
Main Body(Camera)
Inner Cover
Dome Cover
73°
195°
Rotate Base
Tilt Base
10
User Guide
 You can adjust camera to any direction by using the Pan, Tilt, Rotate mechanism.
• Pan Base moves by 170° in each direction or 340° in total.
• Tilt Base covers 73° in each direction or 146° in total.
• T he angle range of the Rotate Base is the same as that of the Pan Base.But one
direction range is 195° and another is 145°
 Methods of adjustment
• Wall installation
...After mounting the camera to the wall, loosen the rotate base holding screws.
...Adjust to the correct panning angle.
...Then adjust the tilt angle by rotating the base.
...Once complete re-tighten the rotate base holding screws.
• Ceiling installation
...After mounting the camera to the ceiling, loosen the rotate base holding screws.
...Adjust to the correct panning angle.
...Then adjust the tilt angle by rotating the base.
...Once complete re-tighten the rotate base holding screws.
Notes
•   W henadjustingtherotatingangle,loosenrotatebaseholdingscrewasfollowsFigures.
Thentightenitagain.
•   W henadjustingthetiltingangle,gripthetiltbaseandadjusttiltingangle.
•   W henadjustingthepanningangle,loosenpanbaseholdingscrewsasshownbelow
andthenre-tighten.
RotateBaseHoldingScrew
PanBaseHoldingScrew
• W henadjustingthetiltmechanismholdtheTiltbaseandNOTthelens.
COLOR DOME CAMERA
RotateBaseHoldingScrew
11
User Guide