Samsung SCV-2120 User Manual page 19

Operating Your Camera
• INT : I nternal synchronization
• LL : E xternal line-lock synchronization
· If you choose 'LL', you can adjust the desired phase.
Press the SET button.
· Y ou can adjust the desired phase from 0 to 359.
COMM ADJ (Communication Adjustment) :
This function sets up the camera communication status
when controlling the camera through an external
controlled device.
 When the SPECIAL menu screen is displayed, by
moving the up or down direction of the Function Setup
Switch so that the arrow indicates 'COMM ADJ'.
 Set up the mode moving the 4 direction of Function Setup Switch.
- CAM ID : Determines the camera's identification number (between 0 and 255).
- Protocol : Select the communication PROTOCOL. (SAMSUNG-T/PELCO-D/PELCO-P/
BOSCH/HONEYWELL/VICON/AD/SAMSUNG-E/PANASONIC)
- B AUD RATE : You can select 2400/4800/9600/19200/38400/57600 bps.
- UART MODE : You can select NONE, EVEN or ODD for the parity bits.
COLOR DOME CAMERA
COMMUNICATION SETUP
SAMSUNG-T
▶PROTOCOL
CAM ID 1
|
|||||||||||||||||||||||||
BAUD RATE 9600
UART MODE 8-N-1
RET PKT DISABLE
RETURN
36
User Guide
- RET PKT : You can choose whether to send an ACK signal when the communication
control command is issued to the camera.
IMAGE ADJ : Includes image quality or special function factors.
SPECIAL SETUP
PRIVACY
DAY/NIGHT
DIS
SYNC
COMM ADJ
IMAGE ADJ
MONITOR
 When the SETUP menu screen is displayed, select 'IMAGE ADJ.' by moving the up or
down direction of the Function Setup Switch so that the arrow indicates 'IMAGE ADJ.
 Select a desired mode by moving the up or down direction of the Function Setup
Switch.
- H-REV : You can flip the picture horizontally on the
screen.
- V-REV : You can flip the picture vertically on the screen.
- SHARPNESS : As you increase this value, the picture
outline becomes stronger and clearer.
COLOR DOME CAMERA
OFF
AUTO
OFF
INT
CRT
IMAGE SETUP
OFF
▶H-REV
V-REV OFF
SHARPNESS ON
RETURN
SHARPNESS SETUP
16
▶LEVEL
|
|||||||||||||||||||| |||||
RETURN
37
User Guide