Cleaning; Internal Cleaning Cycles; Cleaning Schedule - Tally Xpress T8016 User Manual

Cleaning

When does the printer need cleaning?

Internal Cleaning Cycles

The image unit performs an automatic cleaning rotation after every page of
one-page simplex jobs and pages longer than 14 inches (355.6 mm), and
between pages of multipage jobs, depending on the amount of processing
required between pages. Cleaning cycles also occur at intervals (as shown
below) depending on the amount of simplex pages printed.
The printer pauses for approximately 30 seconds to do an automatic internal
cleaning cycle during long print jobs.
2 ?
The cleaning cycle interval is more frequent as the imaging unit ages.
Image Unit Print Count
0–5,119
5,120–20,479
20,480–25,599
25,600–30,720+

Cleaning Schedule

This item needs
cleaning...
Printer exterior
Density sensor
What cleaning materials should I use?
Attention
Do not vacuum the printer; vacuuming could cause static electricity to
build up and damage sensors.
60
Printer Pauses Every x Simplex Pages
48
32
20
16
After...
Every month, or as
necessary
ADC SENSOR DUSTI-
NESS WARNING appears in
the message window
.
By...
User
Cleaning