Specifications - Ramsey Electronics PX50 User Manual

Fm stereo transmitter
Hide thumbs Also See for PX50:
Table of Contents

Advertisement

PX50 SPECIFICATIONS
Frequency Range:
Primary Power Input:
Backup Power Input:
Broadcast Modes:
Bandwidth:
Separation:
Crosstalk:
Asynchronous:
THD:
Audio Inputs:
Audio Input Impedance:
SCA and Digital Inputs:
RF Output:
Harmonic Suppression:
Display:
Controls:
Cooling:
Over-Power Protection:
VSWR Protection:
Over-Temperature Protection:
Auto Power Reduction On Error:
Auto Power Restoration Timer:
Overmodulation Protection:
Audio Frequency Range:
Adjustments:
Regulatory Approval:
Dimensions:
87.5 to 108.1 MHz
85-264 VAC, 47-63 Hz; 120-370 VDC
12-14 VDC
Stereo/Mono + SCA and Digital RDS Inputs.
±75 kHz when properly adjusted, auto adjust feature prevents overmodulation.
Better than 50 dB (typical 60–70 dB)
Better than 50 dB.
Better than 60 dB.
Better than 0.3% with processing.
Standard Balanced Inputs +4 dBu/1.228V rms/3.47 V p-p; -10 to +10 dBm
range.
22K Ohms
BNC (50 Ohms)
50W Continuous into a 50 ohm load. Fully adjustable from 1 watt to full
power.
Better than -81 dBc
2 lines x 20 characters vacuum fluorescent display.
5 navigation controls (Up, Down, Left, Right, Enter)
High CFM Fan, dual filtered front intake, rear exhaust.
Continuously checks for proper power output to within 5%.
Continuous VSWR monitoring, controlled via Power Reduction On Error and
Power Restoration Timer settings.
Auto over-temperature control, 70°C max. fixed, controlled via Power
Reduction On Error and Power Restoration Timer settings.
Automatically reduces power output to 85%, 75%, 50%, 25% or full disable
of set power level.
Sets the time interval for automatic error checking to clear reduced power
modes and to restore full set power level.
Auto control of audio modulation levels, on/off.
20 Hz to 16 kHz ±1 dB. Steep "brick wall" 16 kHz low phase shift, low pass
filter, down 68 dB @ 19 kHz and above.
Audio input levels, Modulation Level, Power Level, Frequency (in 100 kHz
steps), Stereo/Mono mode, Auto Adjust Modulation mode (On/Off)
Meets or exceeds FCC 47CFR Parts 15.107(b), 15.109(b); FCC CERTIFIED FCC
47CFR Parts 2, 73, and 74 (ID: PF3PX50)
Standard 2-unit rack-mount case, 19" wide, 14.25" deep, 3.5" high.
(Note: The end user is responsible for complying with all FCC rules & regula
tions within the US, or any regulations of their respective governing body)
22

Advertisement

Table of Contents
loading

Table of Contents